Pordrän Cover strip

The Pordrän cover strip is used as a finishing element when installing Pordrän boards approximately 50 mm below the intended final ground level. The Pordrän cover strip is available in two widths, 100 mm and 200 mm, with a length of 2400 mm.

The strip is fastened with Pordrän self-tapping rivets with a maximum length of 150 mm. On uneven walls, the self-tapping rivets may need to be fixed more densely. The joint between the strip and the wall is sealed with Pordrän sealing compound or an equivalent product. Joints must be overlapped by at least 50 mm.
At corners, it is recommended to use Pordrän corner strips, available in widths of 100 mm or 200 mm, or straight strips twisted around the corner and sealed with Pordrän sealing compound or an equivalent.
Width: 100 mm and 200 mm, Length: 2400 mm.